[EasyPHP - The WAMP package] - Forum (EasyPHP and Modules : WordPress, Spip, Prestashop, Joomla, Drupal, phpBB, Phorum...) - EasyPHP 3.0

How to block access to WWW folder to steal the php code in a local application (4 replies)

LSilva — Tue, 18 May 2010 15:16:04 +0200

I would like to know how to block access to user folder www undue do not copy the code from my system. He has run in local machine and application server.

Change port ! (5 replies)

Jerome12 — Wed, 27 Jan 2010 15:05:44 +0100

Hello,

I have some problem to start my EasyPHP.
Always, when I start it, I get the message : an other server use the port or the port is lock by the firewall.

After that i open the easyPHP window and I see that the MySQL server is started and the Apache server not.

I try to change the Apache port configuration in the file httpd.conf.
I replace the ligne Listen 127.0.0.1:80 by Listen 127.0.0.1:86.
It was the same think.

After that, I try to stop my firewall, and it was the same think too.

I looked for wich other server used the port, and I did not find.

My fire wall is AVG.

Have you ever seen the same problem ?
Have you a solution for this ?

Thank you,
Jerome12

Restauration de mon site distant impossible en local avec Easy PHP 3.0 (5 replies)

Luc — Sun, 11 Oct 2009 12:14:11 +0200

Bonjour,

Je rencontre un problème de restauration du site distant sur mon serveur local Easy PHP 3.0
J'utilise le composant joomlapack pour effectuer ma sauvegarde et joomlaPack Installer 4.0 pour la restauration.
A l'étape N°2 (restauration de la base de données) j'ai le message d'erreur suivant : MsSQL: MySQL query failded with error 1214 (Le type de table utilisé ne supporte pas les index FULL TEXT)

Pouvez vous m'aider ?

D'avance merci

Bien cordialement

Luc Vignerot

password errors (no replies)

jacobi — Wed, 16 Sep 2009 13:03:39 +0200

Hello everybody

i have a question and error report.

question)

I have played a little with easyphp 3.0 and i tryed to remove the password. But now i can't go into the mysql manager anymore.

when i'm going to the phpMyAdmin (http://127.0.0.1/home/mysql/) i get this error.

Fejl

MySQL returnerede: Dokumentation
#1045 - Access denied for user 'root'@'localhost' (using password: YES)
phpMyAdmin forsøgte at forbinde til MySQL-serveren, og serveren afviste forbindelsen. Du bør tjekke host, brugernavn og kodeord i config.inc.php og sikre dig at de svarer til den information du har fået af administratoren af MySQL-serveren.

I tryed to go change the config.inc.php file but inside there it dos't help to remove the password variable.

What can i do to get it to work again.?

error report)

I got this error when i'm trying to search about "password" in this forum i get this error:

Access denied for user 'easyphp'@'localhost' to database 'easyphp': create temporary table phorum_search_ft_06ebc4a719b2c85051af9d001dfc5d0f (key(message_id)) ENGINE=HEAP select message_id from phorum_search where MATCH (search_text) AGAINST ('password' IN BOOLEAN MODE)

the path to the search is: [www.easyphp.org]

mod_rewrite not working ! (no replies)

glenelkins — Mon, 10 Aug 2009 14:23:45 +0200

I dont understand what is going on here. But all i keep getting in Firefox is "Connection Interrupted"

Here is my httpd.conf file

# IMPORTANT
# ${path} is used to specify EasyPHP installation path

#
# This is the main Apache HTTP server configuration file. It contains the
# configuration directives that give the server its instructions.
# See httpd.apache.org]; for detailed information.
# In particular, see
# httpd.apache.org];
# for a discussion of each configuration directive.
#
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
#
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
# with ServerRoot set to "${path}/apache" will be interpreted by the
# server as "${path}/apache/logs/foo.log".
#
# NOTE: Where filenames are specified, you must use forward slashes
# instead of backslashes (e.g., "c:/apache" instead of "c:\apache").
# If a drive letter is omitted, the drive on which httpd.exe is located
# will be used by default. It is recommended that you always supply
# an explicit drive letter in absolute paths to avoid confusion.

#
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
#
# Do not add a slash at the end of the directory path. If you point
# ServerRoot at a non-local disk, be sure to point the LockFile directive
# at a local disk. If you wish to share the same ServerRoot for multiple
# httpd daemons, you will need to change at least LockFile and PidFile.
#
ServerRoot "${path}/apache"

#
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the
# directive.
#
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses.
#
#Listen 12.34.56.78:80
Listen 127.0.0.1:80

#
# Dynamic Shared Object (DSO) Support
#
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
#
# Example:
# LoadModule foo_module modules/mod_foo.so
#
LoadModule actions_module modules/mod_actions.so
LoadModule alias_module modules/mod_alias.so
LoadModule asis_module modules/mod_asis.so
LoadModule auth_basic_module modules/mod_auth_basic.so
#LoadModule auth_digest_module modules/mod_auth_digest.so
#LoadModule authn_alias_module modules/mod_authn_alias.so
#LoadModule authn_anon_module modules/mod_authn_anon.so
#LoadModule authn_dbd_module modules/mod_authn_dbd.so
#LoadModule authn_dbm_module modules/mod_authn_dbm.so
LoadModule authn_default_module modules/mod_authn_default.so
LoadModule authn_file_module modules/mod_authn_file.so
#LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
#LoadModule authz_dbm_module modules/mod_authz_dbm.so
LoadModule authz_default_module modules/mod_authz_default.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_host_module modules/mod_authz_host.so
#LoadModule authz_owner_module modules/mod_authz_owner.so
LoadModule authz_user_module modules/mod_authz_user.so
LoadModule autoindex_module modules/mod_autoindex.so
#LoadModule cache_module modules/mod_cache.so
#LoadModule cern_meta_module modules/mod_cern_meta.so
LoadModule cgi_module modules/mod_cgi.so
#LoadModule charset_lite_module modules/mod_charset_lite.so
#LoadModule dav_module modules/mod_dav.so
#LoadModule dav_fs_module modules/mod_dav_fs.so
#LoadModule dav_lock_module modules/mod_dav_lock.so
#LoadModule dbd_module modules/mod_dbd.so
#LoadModule deflate_module modules/mod_deflate.so
LoadModule dir_module modules/mod_dir.so
#LoadModule disk_cache_module modules/mod_disk_cache.so
#LoadModule dumpio_module modules/mod_dumpio.so
LoadModule env_module modules/mod_env.so
#LoadModule expires_module modules/mod_expires.so
#LoadModule ext_filter_module modules/mod_ext_filter.so
#LoadModule file_cache_module modules/mod_file_cache.so
#LoadModule filter_module modules/mod_filter.so
#LoadModule headers_module modules/mod_headers.so
#LoadModule ident_module modules/mod_ident.so
#LoadModule imagemap_module modules/mod_imagemap.so
LoadModule include_module modules/mod_include.so
#LoadModule info_module modules/mod_info.so
LoadModule isapi_module modules/mod_isapi.so
#LoadModule ldap_module modules/mod_ldap.so
#LoadModule logio_module modules/mod_logio.so
LoadModule log_config_module modules/mod_log_config.so
#LoadModule log_forensic_module modules/mod_log_forensic.so
#LoadModule mem_cache_module modules/mod_mem_cache.so
LoadModule mime_module modules/mod_mime.so
#LoadModule mime_magic_module modules/mod_mime_magic.so
LoadModule negotiation_module modules/mod_negotiation.so
#LoadModule proxy_module modules/mod_proxy.so
#LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
#LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
#LoadModule proxy_connect_module modules/mod_proxy_connect.so
#LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
#LoadModule proxy_http_module modules/mod_proxy_http.so
LoadModule rewrite_module modules/mod_rewrite.so
LoadModule setenvif_module modules/mod_setenvif.so
#LoadModule speling_module modules/mod_speling.so
#LoadModule ssl_module modules/mod_ssl.so
#LoadModule status_module modules/mod_status.so
#LoadModule substitute_module modules/mod_substitute.so
#LoadModule unique_id_module modules/mod_unique_id.so
#LoadModule userdir_module modules/mod_userdir.so
#LoadModule usertrack_module modules/mod_usertrack.so
#LoadModule version_module modules/mod_version.so
#LoadModule vhost_alias_module modules/mod_vhost_alias.so

LoadModule php5_module "${path}/php/php5apache2_2.dll"
PHPIniDir "${path}/apache"
SetEnv TMP "${path}/tmp"

#
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.
#
# User/Group: The name (or #number) of the user/group to run httpd as.
# It is usually good practice to create a dedicated user and group for
# running httpd, as with most system services.
#
User daemon
Group daemon

# 'Main' server configuration
#
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# definition. These values also provide defaults for
# any containers you may define later in the file.
#
# All of these directives may appear inside containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
#

#
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents. e.g. admin@your-domain.com
#
ServerAdmin admin@localhost

#
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
#
# If your host doesn't have a registered DNS name, enter its IP address here.
#
ServerName localhost

#
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
#
DocumentRoot "${path}/www"

#
# Each directory to which Apache has access can be configured with respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories).
#
# First, we configure the "default" to be a very restrictive set of
# features.
#

Options FollowSymLinks
AllowOverride none
Order deny,allow
Deny from all

#
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
#

#
# This should be changed to whatever you set DocumentRoot to.
#

#
# Possible values for the Options directive are "None", "All",
# or any combination of:
# Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
#
# Note that "MultiViews" must be named *explicitly* --- "Options All"
# doesn't give it to you.
#
# The Options directive is both complicated and important. Please see
# [httpd.apache.org]
# for more information.
#
Options Indexes FollowSymLinks

#
# AllowOverride controls what directives may be placed in .htaccess files.
# It can be "All", "None", or any combination of the keywords:
# Options FileInfo AuthConfig Limit
#
AllowOverride All

#
# Controls who can get stuff from this server.
#
Order allow,deny
Allow from all

#
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
#

DirectoryIndex index.html index.shtml index.wml index.pwml index.php index.php3 index.php4 index.php5

#
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
#

Order allow,deny
Deny from all
Satisfy All

#
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a
# container, error messages relating to that virtual host will be
# logged here. If you *do* define an error logfile for a
# container, that host's errors will be logged there and not here.
#
ErrorLog "logs/error.log"

#
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
#
LogLevel warn

#
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
#
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common

# You need to enable mod_logio.c to use %I and %O
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio

#
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a
# container, they will be logged here. Contrariwise, if you *do*
# define per- access logfiles, transactions will be
# logged therein and *not* in this file.
#
CustomLog "logs/access.log" common

#
# If you prefer a logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#
#CustomLog "logs/access.log" combined

#
# Redirect: Allows you to tell clients about documents that used to
# exist in your server's namespace, but do not anymore. The client
# will make a new request for the document at its new location.
# Example:
# Redirect permanent /foo [localhost]

#
# Alias: Maps web paths into filesystem paths and is used to
# access content that does not live under the DocumentRoot.
# Example:
# Alias /webpath /full/filesystem/path
Alias /images_easyphp "${path}/home/images_easyphp"
Alias /home/mysql "${path}/phpmyadmin"
Alias /home/sqlite "${path}/sqlitemanager"
Alias /home "${path}/home"

#
# If you include a trailing / on /webpath then the server will
# require it to be present in the URL. You will also likely
# need to provide a section to allow access to
# the filesystem path.

Options Indexes MultiViews
AllowOverride None
Order allow,deny
Allow from all

Options FollowSymLinks Indexes
AllowOverride None
Order deny,allow
allow from 127.0.0.1
deny from all

Options FollowSymLinks Indexes
AllowOverride None
Order deny,allow
allow from 127.0.0.1
deny from all

Options FollowSymLinks Indexes
AllowOverride None
Order deny,allow
allow from 127.0.0.1
deny from all

#
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the target directory are treated as applications and
# run by the server when requested rather than as documents sent to the
# client. The same rules about trailing "/" apply to ScriptAlias
# directives as to Alias.
#
ScriptAlias /cgi-bin/ "${path}/apache/cgi-bin/"

#
# ScriptSock: On threaded servers, designate the path to the UNIX
# socket used to communicate with the CGI daemon of mod_cgid.
#
#Scriptsock logs/cgisock

#
# "${path}/apache/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
#

AllowOverride None
Options None
Order allow,deny
Allow from all

#
# DefaultType: the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value. If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
#
DefaultType text/plain

#
# TypesConfig points to the file containing the list of mappings from
# filename extension to MIME-type.
#
TypesConfig conf/mime.types

#
# AddType allows you to add to or override the MIME configuration
# file specified in TypesConfig for specific file types.
#
#AddType application/x-gzip .tgz
#
# AddEncoding allows you to have certain browsers uncompress
# information on the fly. Note: Not all browsers support this.
#
#AddEncoding x-compress .Z
#AddEncoding x-gzip .gz .tgz
#
# If the AddEncoding directives above are commented-out, then you
# probably should define those extensions to indicate media types:
#
AddType application/x-compress .Z
AddType application/x-gzip .gz .tgz
AddType application/x-tar .tgz
AddType image/x-icon .ico
AddType application/vnd.wap.wmlc .wmlc
AddType application/x-httpd-php .phtml .pwml .php5 .php4 .php3 .php2 .php .inc
AddType text/vnd.wap.wml .wml
AddType text/vnd.wap.wmlscript .wmls
AddType text/vnd.wap.wmlscriptc .wmlsc
AddType image/vnd.wap.wbmp .wbmp

#
# AddHandler allows you to map certain file extensions to "handlers":
# actions unrelated to filetype. These can be either built into the server
# or added with the Action directive (see below)
#
# To use CGI scripts outside of ScriptAliased directories:
# (You will also need to add "ExecCGI" to the "Options" directive.)
#
#AddHandler cgi-script .cgi

# For type maps (negotiated resources):
#AddHandler type-map var

#
# Filters allow you to process content before it is sent to the client.
#
# To parse .shtml files for server-side includes (SSI):
# (You will also need to add "Includes" to the "Options" directive.)
#
#AddType text/html .shtml
#AddOutputFilter INCLUDES .shtml

#
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
#
#MIMEMagicFile conf/magic

#
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
#
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 [localhost]
#

#
# EnableMMAP and EnableSendfile: On systems that support it,
# memory-mapping or the sendfile syscall is used to deliver
# files. This usually improves server performance, but must
# be turned off when serving from networked-mounted
# filesystems or if support for these functions is otherwise
# broken on your system.
#
#EnableMMAP off
#EnableSendfile off

# ============================================================================
# Multi-language error messages
# The configuration below implements multi-language error documents through
# content-negotiation.
#
# Required modules: mod_alias, mod_include, mod_negotiation
#
# We use Alias to redirect any /error/HTTP_.html.var response to
# our collection of by-error message multi-language collections. We use
# includes to substitute the appropriate text.
#
# You can modify the messages' appearance without changing any of the
# default HTTP_.html.var files by adding the line:
#
# Alias /error/include/ "/your/include/path/"
#
# which allows you to create your own set of files by starting with the
# ${path}/apache/error/include/ files and copying them to /your/include/path/,
# even on a per-VirtualHost basis. The default include files will display
# your Apache version number and your ServerAdmin email address regardless
# of the setting of ServerSignature.

Alias /error/ "${path}/apache/error/"

AllowOverride None
Options IncludesNoExec
AddOutputFilter Includes html
AddHandler type-map var
Order allow,deny
Allow from all
LanguagePriority en cs de es fr it ja ko nl pl pt-br ro sv tr
ForceLanguagePriority Prefer Fallback

ErrorDocument 400 /error/HTTP_BAD_REQUEST.html.var
ErrorDocument 401 /error/HTTP_UNAUTHORIZED.html.var
ErrorDocument 403 /error/HTTP_FORBIDDEN.html.var
ErrorDocument 404 /error/HTTP_NOT_FOUND.html.var
ErrorDocument 405 /error/HTTP_METHOD_NOT_ALLOWED.html.var
ErrorDocument 408 /error/HTTP_REQUEST_TIME_OUT.html.var
ErrorDocument 410 /error/HTTP_GONE.html.var
ErrorDocument 411 /error/HTTP_LENGTH_REQUIRED.html.var
ErrorDocument 412 /error/HTTP_PRECONDITION_FAILED.html.var
ErrorDocument 413 /error/HTTP_REQUEST_ENTITY_TOO_LARGE.html.var
ErrorDocument 414 /error/HTTP_REQUEST_URI_TOO_LARGE.html.var
ErrorDocument 415 /error/HTTP_UNSUPPORTED_MEDIA_TYPE.html.var
ErrorDocument 500 /error/HTTP_INTERNAL_SERVER_ERROR.html.var
ErrorDocument 501 /error/HTTP_NOT_IMPLEMENTED.html.var
ErrorDocument 502 /error/HTTP_BAD_GATEWAY.html.var
ErrorDocument 503 /error/HTTP_SERVICE_UNAVAILABLE.html.var
ErrorDocument 506 /error/HTTP_VARIANT_ALSO_VARIES.html.var
# ============================================================================

# ============================================================================
# Fancy directory listings
# Directives controlling the display of server-generated directory listings.
#
# Required modules: mod_autoindex, mod_alias
#
# To see the listing of a directory, the Options directive for the
# directory must include "Indexes", and the directory must not contain
# a file matching those listed in the DirectoryIndex directive.
#

#
# IndexOptions: Controls the appearance of server-generated directory
# listings.
#
IndexOptions FancyIndexing HTMLTable VersionSort

# We include the /icons/ alias for FancyIndexed directory listings. If
# you do not use FancyIndexing, you may comment this out.
#
Alias /icons/ "${path}/apache/icons/"

Options Indexes MultiViews
AllowOverride None
Order allow,deny
Allow from all

#
# AddIcon* directives tell the server which icon to show for different
# files or filename extensions. These are only displayed for
# FancyIndexed directories.
#
AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip

AddIconByType (TXT,/icons/text.gif) text/*
AddIconByType (IMG,/icons/image2.gif) image/*
AddIconByType (SND,/icons/sound2.gif) audio/*
AddIconByType (VID,/icons/movie.gif) video/*

AddIcon /icons/binary.gif .bin .exe
AddIcon /icons/binhex.gif .hqx
AddIcon /icons/tar.gif .tar
AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
AddIcon /icons/a.gif .ps .ai .eps
AddIcon /icons/layout.gif .html .shtml .htm .pdf
AddIcon /icons/text.gif .txt
AddIcon /icons/c.gif .c
AddIcon /icons/p.gif .pl .py
AddIcon /icons/f.gif .for
AddIcon /icons/dvi.gif .dvi
AddIcon /icons/uuencoded.gif .uu
AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
AddIcon /icons/tex.gif .tex
AddIcon /icons/bomb.gif core

AddIcon /icons/back.gif ..
AddIcon /icons/hand.right.gif README
AddIcon /icons/folder.gif ^^DIRECTORY^^
AddIcon /icons/blank.gif ^^BLANKICON^^

#
# DefaultIcon is which icon to show for files which do not have an icon
# explicitly set.
#
DefaultIcon /icons/unknown.gif

#
# AddDescription allows you to place a short description after a file in
# server-generated indexes. These are only displayed for FancyIndexed
# directories.
# Format: AddDescription "description" filename
#
AddDescription "GZIP compressed document" .gz
AddDescription "tar archive" .tar
AddDescription "GZIP compressed tar archive" .tgz
AddDescription "ZIP archive" .zip
AddDescription "CAB archive" .cab
AddDescription "Win32 Executable" .exe

#
# ReadmeName is the name of the README file the server will look for by
# default, and append to directory listings.
#
# HeaderName is the name of a file which should be prepended to
# directory indexes.
ReadmeName /icons/FancyIndexing/readme.html
HeaderName /icons/FancyIndexing/header.html

#
# IndexIgnore is a set of filenames which directory indexing should ignore
# and not include in the listing. Shell-style wildcarding is permitted.
#
IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t
# ============================================================================

# ============================================================================
# Distributed authoring and versioning (WebDAV)
# #
# # Required modules: mod_dav, mod_dav_fs, mod_setenvif, mod_alias
# # mod_auth_digest, mod_authn_file
# #
#
# # The following example gives DAV write access to a directory called
# # "uploads" under the ServerRoot directory.
# #
# # The User/Group specified in httpd.conf needs to have write permissions
# # on the directory where the DavLockDB is placed and on any directory where
# # "Dav On" is specified.
#
# DavLockDB "${path}/apache/var/DavLock"
#
# Alias /uploads "${path}/apache/uploads"
#
#
# Dav On
#
# Order Allow,Deny
# Allow from all
#
# AuthType Digest
# AuthName DAV-upload
#
# # You can use the htdigest program to create the password database:
# # htdigest -c "${path}/apache/user.passwd" DAV-upload admin
# AuthUserFile "${path}/apache/user.passwd"
# AuthDigestProvider file
#
# # Allow universal read-access, but writes are restricted
# # to the admin user.
#
# require user admin
#
#
#
# #
# # The following directives disable redirects on non-GET requests for
# # a directory that does not include the trailing slash. This fixes a
# # problem with several clients that do not appropriately handle
# # redirects for folders with DAV methods.
# #
# BrowserMatch "Microsoft Data Access Internet Publishing Provider" redirect-carefully
# BrowserMatch "MS FrontPage" redirect-carefully
# BrowserMatch "^WebDrive" redirect-carefully
# BrowserMatch "^WebDAVFS/1.[0123]" redirect-carefully
# BrowserMatch "^gnome-vfs/1.0" redirect-carefully
# BrowserMatch "^XML Spy" redirect-carefully
# BrowserMatch "^Dreamweaver-WebDAV-SCM1" redirect-carefully
# ============================================================================

# ============================================================================
# Secure (SSL/TLS) connections
# #
# # This is the Apache server configuration file providing SSL support.
# # It contains the configuration directives to instruct the server how to
# # serve pages over an https connection. For detailing information about these
# # directives see httpd.apache.org];
# #
# # Do NOT simply read the instructions in here without understanding
# # what they do. They're here only as hints or reminders. If you are unsure
# # consult the online docs. You have been warned.
# #
#
# #
# # Pseudo Random Number Generator (PRNG):
# # Configure one or more sources to seed the PRNG of the SSL library.
# # The seed data should be of good random quality.
# # WARNING! On some platforms /dev/random blocks if not enough entropy
# # is available. This means you then cannot use the /dev/random device
# # because it would lead to very long connection times (as long as
# # it requires to make more entropy available). But usually those
# # platforms additionally provide a /dev/urandom device which doesn't
# # block. So, if available, use this one instead. Read the mod_ssl User
# # Manual for more details.
# #
# #SSLRandomSeed startup file:/dev/random 512
# #SSLRandomSeed startup file:/dev/urandom 512
# #SSLRandomSeed connect file:/dev/random 512
# #SSLRandomSeed connect file:/dev/urandom 512
#
#
# #
# # When we also provide SSL we have to listen to the
# # standard HTTP port (see above) and to the HTTPS port
# #
# # Note: Configurations that use IPv6 but not IPv4-mapped addresses need two
# # Listen directives: "Listen [::]:443" and "Listen 0.0.0.0:443"
# #
# Listen 443
#
# ##
# ## SSL Global Context
# ##
# ## All SSL configuration in this context applies both to
# ## the main server and all SSL-enabled virtual hosts.
# ##
#
# #
# # Some MIME-types for downloading Certificates and CRLs
# #
# AddType application/x-x509-ca-cert .crt
# AddType application/x-pkcs7-crl .crl
#
# # Pass Phrase Dialog:
# # Configure the pass phrase gathering process.
# # The filtering dialog program (`builtin' is a internal
# # terminal dialog) has to provide the pass phrase on stdout.
# SSLPassPhraseDialog builtin
#
# # Inter-Process Session Cache:
# # Configure the SSL Session Cache: First the mechanism
# # to use and second the expiring timeout (in seconds).
# #SSLSessionCache "dbm:${path}/apache/logs/ssl_scache"
# SSLSessionCache "shmcb:${path}/apache/logs/ssl_scache(512000)"
# SSLSessionCacheTimeout 300
#
# # Semaphore:
# # Configure the path to the mutual exclusion semaphore the
# # SSL engine uses internally for inter-process synchronization.
# SSLMutex default
#
# ##
# ## SSL Virtual Host Context
# ##
#
#
#
# # General setup for the virtual host
# DocumentRoot "${path}/www"
# ServerName localhost:443
# ServerAdmin admin@localhost
# ErrorLog "${path}/apache/logs/error.log"
# TransferLog "${path}/apache/access.log"
#
# # SSL Engine Switch:
# # Enable/Disable SSL for this virtual host.
# SSLEngine on
#
# # SSL Cipher Suite:
# # List the ciphers that the client is permitted to negotiate.
# # See the mod_ssl documentation for a complete list.
# SSLCipherSuite ALL:!ADH:!EXPORT56:RC4+RSA:+HIGH:+MEDIUM:+LOW:+SSLv2:+EXP:+eNULL
#
# # Server Certificate:
# # Point SSLCertificateFile at a PEM encoded certificate. If
# # the certificate is encrypted, then you will be prompted for a
# # pass phrase. Note that a kill -HUP will prompt again. Keep
# # in mind that if you have both an RSA and a DSA certificate you
# # can configure both in parallel (to also allow the use of DSA
# # ciphers, etc.)
# SSLCertificateFile "${path}/apache/conf/server.crt"
# #SSLCertificateFile "${path}/apache/conf/server-dsa.crt"
#
# # Server Private Key:
# # If the key is not combined with the certificate, use this
# # directive to point at the key file. Keep in mind that if
# # you've both a RSA and a DSA private key you can configure
# # both in parallel (to also allow the use of DSA ciphers, etc.)
# SSLCertificateKeyFile "${path}/apache/conf/server.key"
# #SSLCertificateKeyFile "${path}/apache/conf/server-dsa.key"
#
# # Server Certificate Chain:
# # Point SSLCertificateChainFile at a file containing the
# # concatenation of PEM encoded CA certificates which form the
# # certificate chain for the server certificate. Alternatively
# # the referenced file can be the same as SSLCertificateFile
# # when the CA certificates are directly appended to the server
# # certificate for convinience.
# #SSLCertificateChainFile "${path}/apache/conf/server-ca.crt"
#
# # Certificate Authority (CA):
# # Set the CA certificate verification path where to find CA
# # certificates for client authentication or alternatively one
# # huge file containing all of them (file must be PEM encoded)
# # Note: Inside SSLCACertificatePath you need hash symlinks
# # to point to the certificate files. Use the provided
# # Makefile to update the hash symlinks after changes.
# #SSLCACertificatePath "${path}/apache/conf/ssl.crt"
# #SSLCACertificateFile "${path}/apache/conf/ssl.crt/ca-bundle.crt"
#
# # Certificate Revocation Lists (CRL):
# # Set the CA revocation path where to find CA CRLs for client
# # authentication or alternatively one huge file containing all
# # of them (file must be PEM encoded)
# # Note: Inside SSLCARevocationPath you need hash symlinks
# # to point to the certificate files. Use the provided
# # Makefile to update the hash symlinks after changes.
# #SSLCARevocationPath "${path}/apache/conf/ssl.crl"
# #SSLCARevocationFile "${path}/apache/conf/ssl.crl/ca-bundle.crl"
#
# # Client Authentication (Type):
# # Client certificate verification type and depth. Types are
# # none, optional, require and optional_no_ca. Depth is a
# # number which specifies how deeply to verify the certificate
# # issuer chain before deciding the certificate is not valid.
# #SSLVerifyClient require
# #SSLVerifyDepth 10
#
# # Access Control:
# # With SSLRequire you can do per-directory access control based
# # on arbitrary complex boolean expressions containing server
# # variable checks and other lookup directives. The syntax is a
# # mixture between C and Perl. See the mod_ssl documentation
# # for more details.
# #
# #SSLRequire ( %{SSL_CIPHER} !~ m/^(EXP|NULL)/ \
# # and %{SSL_CLIENT_S_DN_O} eq "Snake Oil, Ltd." \
# # and %{SSL_CLIENT_S_DN_OU} in {"Staff", "CA", "Dev"} \
# # and %{TIME_WDAY} >= 1 and %{TIME_WDAY} <= 5 \
# # and %{TIME_HOUR} >= 8 and %{TIME_HOUR} <= 20 ) \
# # or %{REMOTE_ADDR} =~ m/^192\.76\.162\.[0-9]+$/
# #
#
# # SSL Engine Options:
# # Set various options for the SSL engine.
# # o FakeBasicAuth:
# # Translate the client X.509 into a Basic Authorisation. This means that
# # the standard Auth/DBMAuth methods can be used for access control. The
# # user name is the `one line' version of the client's X.509 certificate.
# # Note that no password is obtained from the user. Every entry in the user
# # file needs this password: `xxj31ZMTZzkVA'.
# # o ExportCertData:
# # This exports two additional environment variables: SSL_CLIENT_CERT and
# # SSL_SERVER_CERT. These contain the PEM-encoded certificates of the
# # server (always existing) and the client (only existing when client
# # authentication is used). This can be used to import the certificates
# # into CGI scripts.
# # o StdEnvVars:
# # This exports the standard SSL/TLS related `SSL_*' environment variables.
# # Per default this exportation is switched off for performance reasons,
# # because the extraction step is an expensive operation and is usually
# # useless for serving static content. So one usually enables the
# # exportation for CGI and SSI requests only.
# # o StrictRequire:
# # This denies access when "SSLRequireSSL" or "SSLRequire" applied even
# # under a "Satisfy any" situation, i.e. when it applies access is denied
# # and no other module can change it.
# # o OptRenegotiate:
# # This enables optimized SSL connection renegotiation handling when SSL
# # directives are used in per-directory context.
# #SSLOptions +FakeBasicAuth +ExportCertData +StrictRequire
#
# SSLOptions +StdEnvVars
#
#
# SSLOptions +StdEnvVars
#
#
# # SSL Protocol Adjustments:
# # The safe and default but still SSL/TLS standard compliant shutdown
# # approach is that mod_ssl sends the close notify alert but doesn't wait for
# # the close notify alert from client. When you need a different shutdown
# # approach you can use one of the following variables:
# # o ssl-unclean-shutdown:
# # This forces an unclean shutdown when the connection is closed, i.e. no
# # SSL close notify alert is send or allowed to received. This violates
# # the SSL/TLS standard but is needed for some brain-dead browsers. Use
# # this when you receive I/O errors because of the standard approach where
# # mod_ssl sends the close notify alert.
# # o ssl-accurate-shutdown:
# # This forces an accurate shutdown when the connection is closed, i.e. a
# # SSL close notify alert is send and mod_ssl waits for the close notify
# # alert of the client. This is 100% SSL/TLS standard compliant, but in
# # practice often causes hanging connections with brain-dead browsers. Use
# # this only for browsers where you know that their SSL implementation
# # works correctly.
# # Notice: Most problems of broken clients are also related to the HTTP
# # keep-alive facility, so you usually additionally want to disable
# # keep-alive for those clients, too. Use variable "nokeepalive" for this.
# # Similarly, one has to force some clients to use HTTP/1.0 to workaround
# # their broken HTTP/1.1 implementation. Use variables "downgrade-1.0" and
# # "force-response-1.0" for this.
# BrowserMatch ".*MSIE.*" \
# nokeepalive ssl-unclean-shutdown \
# downgrade-1.0 force-response-1.0
#
# # Per-Server Logging:
# # The home of a custom SSL log file. Use this when you want a
# # compact non-error SSL logfile on a virtual host basis.
# CustomLog "${path}/apache/logs/ssl_request.log" \
# "%t %h %{SSL_PROTOCOL}x %{SSL_CIPHER}x \"%r\" %b"
#
#
# ============================================================================

# ============================================================================
# Virtual Hosts
# #
# # If you want to maintain multiple domains/hostnames on your
# # machine you can setup VirtualHost containers for them. Most configurations
# # use only name-based virtual hosts so the server doesn't need to worry about
# # IP addresses. This is indicated by the asterisks in the directives below.
# #
# # Please see the documentation at
# # httpd.apache.org];
# # for further details before you try to setup virtual hosts.
# #
# # You may use the command line option '-S' to verify your virtual host
# # configuration.
#
# #
# # Use name-based virtual hosting.
# #
# NameVirtualHost *:8080
#
# #
# # VirtualHost example:
# # Almost any Apache directive may go into a VirtualHost container.
# # The first VirtualHost section is used for all requests that do not
# # match a ServerName or ServerAlias in any block.
# #
#
# ServerAdmin webmaster@dummy-host.localhost
# DocumentRoot "${path}/apache/docs/dummy-host.localhost"
# ServerName dummy-host.localhost
# ServerAlias www.dummy-host.localhost
# ErrorLog "logs/dummy-host.localhost-error.log"
# CustomLog "logs/dummy-host.localhost-access.log" common
#
#
#
# ServerAdmin webmaster@dummy-host2.localhost
# DocumentRoot "${path}/apache/docs/dummy-host2.localhost"
# ServerName dummy-host2.localhost
# ErrorLog "logs/dummy-host2.localhost-error.log"
# CustomLog "logs/dummy-host2.localhost-access.log" common
#
# ============================================================================

# ============================================================================
# Supplemental configuration
#
# The configuration files in the conf/extra/ directory can be
# included to add extra features or to modify the default configuration of
# the server, or you may simply copy their contents here and change as
# necessary.

# Language settings
Include conf/extra/httpd-languages.conf

# Server-pool management (MPM specific)
#Include conf/extra/httpd-mpm.conf

# Real-time info on requests and configuration
#Include conf/extra/httpd-info.conf

# Various default settings
#Include conf/extra/httpd-default.conf

# User home directories
#Include conf/extra/httpd-userdir.conf

#
# Note: The following must must be present to support
# starting without SSL on platforms with no /dev/random equivalent
# but a statically compiled-in mod_ssl.
#

SSLRandomSeed startup builtin
SSLRandomSeed connect builtin

# == !!! DO NOT REMOVE !!! ===================================================
### Alias EasyPHP
# ========================================
#alias
#alias
# ========================================
### Alias End
# ============================================================================

Xoops + EasyPHP (no replies)

Gopala — Fri, 07 Aug 2009 22:23:44 +0200

Hi All,

Thank you for your great work!

Please, see EasyPHP 3.0 + CMS Xoops 2.3.3 + Xoops Modules + portuguese translation on:

[www.xoops.org]

Screenshot:

Download:

[code.google.com]

Many thanks

Gopala

Problème port + fenetre administration (1 reply)

gaius18 — Tue, 04 Aug 2009 14:52:16 +0200

Bonjour,
Je viens d'installer EASYPHP, j'ai changer le port 80 de apache en 8081,
pour pas qu'il y est un conflit entre apache et IIS de windows serveur 2003.

donc l'adresse IP est 192.168.1.3:8081 si je veux acceder site

Mais quand je veux allez sur administration dans easyphp, je n'y arrive pas
il me dirige vers 127.0.0.1

J'ai essayé 127.0.0.1:3306 nada
J'ai essayé 192.168.1.3:3306/home nada
J'ai essayé 192.168.1.3/home nada

Comment je dois m'y prendre pour acceder a la fenetre d'administration de easyphp ?

Merci d'avance

Windows local computer, linux server (no replies)

easyphp-rob — Mon, 03 Aug 2009 12:20:35 +0200

Hi, completely new here, so please go easy on me if this is a stupid question!
I have my website hosted on a linux server and I use some php to find out what webpage I'm on and act accordingly. These functions strip away slashes in the path at times, on the linux server this all works fine; but of course on my local windows computer when I use easyphp, the path is:
C:\Program Files\easyphp 3.0\www\
the functions are not made to remove backslashes, but forward slashes as per the linux server. Is there an easy way round this without me having to mess around with the functions that work fine online?
Many thanks, in advance for any help.

Hamachi (1 reply)

Spaceman1861 — Sun, 02 Aug 2009 09:01:46 +0200

Hi
I have installed all of the php package and it works fine and dandy. I was just wondering what details i would have to change to a different ip from the standard 127.0.0.1 so i can host over hamachi. I can host the apache server over hamachi but i am having some trouble with everything else but the apache defult page popping up any help would be dandy :)

apache virtual host (1 reply)

panxponx — Sat, 01 Aug 2009 08:02:40 +0200

Hi, All

I need help in configuring virtual hosts in easyphp 3.0 installation. I basically know how to set a default virtual host but what happpend is when I set 3 virtual host sample:

ServerName sub1.maindom
DocumentRoot "D:/www/project/maindom.sub1"

ServerName maindom
DocumentRoot "D:/www/project/maindom"

ServerName localhost
DocumentRoot "D:/www"

all I get is web running from D:/www/project/maindom, even when I try to access the localhost which should open D:/www it still open a website from D:/www/project/maindom

Can some one point me where it all go wrong? help?

my easyphp doesent register forms or nothing to mysql database please help (7 replies)

wisdomass — Thu, 30 Jul 2009 11:36:43 +0200

i have this kind off problem....
that i have installed scripts to my computer,i have tested many scripts they are right installed. etc but when i want example register new user to my community or something to do with forms.easyphp doesent register my filled forms to database or
somewhere else,example is signup form when i fill that up
and press submit it says user is added,but after that i goto admin panel to see users it doesent go there and not to the mysql database and during prosessing it doesent give any kind off error message,,,,and when i press sent,submit etc it says user added.i have tested about 10 scripts same problem with every script,it doesent register changes,added users etc..what is wrong? my mysql setting should be okay,manually i can add things to database,but added users,"any kind of form" doesent go automaticcly there.any suggestions what settings is wrong????sorry my bad english

error in administration... (no replies)

Solem — Sun, 26 Jul 2009 07:01:28 +0200

This problem has appeared on my page of administration

Warning: Error parsing ../EasyPHP.ini on line 13 in C:\Program Files (x86)\EasyPHP 3.0\home\i18n.inc.php on line 5

ideas?

Solution to the "Apache Can't start" issue - Service name to be changed (no replies)

Seagram999 — Wed, 22 Jul 2009 18:36:55 +0200

English version:
Hello, I found out the reason and the solution of this issue.

As a reminder, here are the messages in EasyPHP.log (based on my translation of french messages):

DD/MM HH:MM:xx EasyPHP Apache Can't install service: Specified file can't be found. (2)
DD/MM HH:MM:xx EasyPHP Apache Cannot run server : Specified service doesn't exist as an installed service. (1060)

What happens is that EasyPHP3.0 expects the Apache service to be named "Apache2".
However, when installing with default options, Apache sets its service name to "Apache2.2".
That's why EasyPhp3.0 can not find it and launch it (or stop it if it's already running)
The solution is to open a console and 1) to uninstall Apache with the default name 2) to install it with the proper command-line setting to force the proper name.

In the console :
-----------------

C:\>"C:\Progra~1\EASYPH~1.0\Apache\bin\apache.exe" -k uninstall
Removing the Apache2.2 service
The Apache2.2 service has been removed successfully.

C:\> "C:\Progra~1\EASYPH~1.0\Apache\bin\apache.exe" -k install -n Apache2
Installing the Apache2 service
The Apache2 service is successfully installed.
Testing httpd.conf....
Errors reported here must be corrected before the service can be started.

C:\>

-----------------------

From now on, EasyPHP3.0 should be able to start/stop services at will.
It seems it works on my computer.
Hope this helps.

Version française :
Bonjour, j'ai trouvé la raison et la solution du problème.

Pour mémoire, voici les messages en français dans EasyPHP.log:

JJ/MM HH:MM:xx EasyPHP Apache Le service n'a pas pu être installé : Le fichier spécifié est introuvable. (2)
JJ/MM HH:MM:xx EasyPHP Apache Le serveur n'a pas pu être lancé : Le service spécifié n'existe pas en tant que service installé. (1060)

Ce qui se passe, c'est que EasyPHP3.0 s'attend à ce que le service Apache service soit dénommé "Apache2".
Cependant, lorsqu'il s'installe avec les options par défaut, Apache donne au service le nom "Apache2.2".
C'est pourquoi EasyPhp3.0 ne peut pas le trouver pour le lancer (ni l'arrêter s'il est déjà lancé)
La solution consiste à ouvrir une console et 1) à désinstaller le service Apache avec le nom par défaut 2) à installer Apache avec le paramètre de ligne de commande qui convient pour forcer le nom correct.

Dans la console (les textes en anglais sont les messages de Apache) :
----------------

C:\>"C:\Progra~1\EASYPH~1.0\Apache\bin\apache.exe" -k uninstall
Removing the Apache2.2 service
The Apache2.2 service has been removed successfully.

C:\> "C:\Progra~1\EASYPH~1.0\Apache\bin\apache.exe" -k install -n Apache2
Installing the Apache2 service
The Apache2 service is successfully installed.
Testing httpd.conf....
Errors reported here must be corrected before the service can be started.

C:\>

-----------------------

A partir de là, EasyPHP3.0 devrait être capable de démarrer/arrêter les services à volonté. Ca semble fonctionner sur mon ordinateur.
J'espère que ça aide.

Questions générales sur le projet (no replies)

bbp — Mon, 13 Jul 2009 12:47:39 +0200

Salut à tous,

Comment peut-on soumettre une amélioration à apporter à easyphp? Est-on entendu? Où peut-on trouver les sources du petit exécutable easyphp?

J'ai remarqué une ou deux modifications intéressantes à faire. J'aurais voulu les exposer, mais je ne sais pas trop où. En fait je sais qu'easyphp a longtemps été en stand by. Aujourd'hui le projet est-il suivi? le projet sur sourceforge m'a l'air bien vide, en fait.

Cordialement,

bbp.

problem with php interpretation (no replies)

throwk — Fri, 10 Jul 2009 11:28:50 +0200

Hi, my easyphp instalation dont know what is function();
it stops on -> and dont interpretate anymore. how can i configure it or solve this problem?

Thanks

CheckServerPorts (1 reply)

msatera — Thu, 09 Jul 2009 23:06:46 +0200

Hi,
I installed EasyPHP 3.0 and after running it I got message 'Apache2 port (80) is used by "" (inetinfo.exe)'. So I changed the port to 8080 in apache configuration. Then I restarded EasyPHP but the message appeared again and again. After half hour of googling I didn't find any solution so I just tried to set CheckServerPorts to "No" through EasyPHP configuration. And I got it finally running.
My question is, what is the purpose of CheckServerPorts property and why is it set to "Yes" by default.
Thanks.

windows firewall (3 replies)

bjeffries111 — Thu, 09 Jul 2009 23:05:15 +0200

I am currently having an issue getting the Apache server to connect. I get a warning "Apache cannot be runned: Another Web server use the port or the port is blocked by firewall" I tried changing my firewall setting with no luck.

Is there anything I can do?

Thanks,
Brian

error after oot windows vista (1 reply)

oneplace — Mon, 06 Jul 2009 23:04:42 +0200

I am getting this error after I boot windows vsta "unexpected error end of mysql"
someone said it might be and old my.cnf file, but I can not find that file anyplace on my system

Apache server doesn't start anylonger (1 reply)

Vaillant — Fri, 03 Jul 2009 07:51:52 +0200

Hello,
I have Vista and EasyPHP superbly worked until two days after updating F-Secure Antivirus and firewall (v 6.12) and Firefox (v3.5).
Now, the Apache server no longer starts automatically.
When I start it manually, boot stops with the message "Apache has terminated unexpectedly."
I note further that I can not reach [127.0.0.1] or [localhost], Firefox displays "Error loading page."
I uninstalled EasyPHP 3.0 completely and then I reinstalled : the problem persists.
Can you help me please?

Apache (1 reply)

Vaillant — Fri, 03 Jul 2009 07:52:31 +0200

Bonjour,
J'ai Vista et EasyPHP marchait superbement jusqu'il y a deux jours, après mise à jour de F-Secure Antivirus et pare-feu (v 6.12) ainsi que FireFox (v3.5).
Maintenant, le serveur Apache ne démarre plus automatiquement.
Quand je le démarre manuellement, il démarre plus s'arrête avec le message "Apache s'est terminé de façon inattendue !".
J'observe d'autre part que je n'arrive pas à atteindre [127.0.0.1] ou bien [localhost], FireFox affiche "Erreur de chargement de la page".
J'ai désinstallé EasyPHP 3.0 complètement puis je l'ai réinstallé : le problème persiste.
Pouvez-vous m'aider SVP ?

HTACCESS not working vista 32 (2 replies)

Shoa — Sat, 11 Jul 2009 21:18:34 +0200

vista Ultimate 32

I am having the very same problem as you I have the three usual solutions active in the default config but .htaccess is being ignored.

LoadModule rewrite_module modules/mod_rewrite.so
AllowOverride All
AccessFileName .htaccess

All of these are unchecked but .htaccess does nothing.
Is there a solution to the problem ??
Or have I over looked something ??

Importing frm files (no replies)

djachka — Thu, 25 Jun 2009 08:21:44 +0200

Is it possible do import frm files from an old database. The old database does not contain data but I am interested in recovering the structure of the base.

message davertissement dans phpmyadmin (1 reply)

pascalpinhas — Sat, 04 Jul 2009 09:36:36 +0200

Bonsoir,
J'ai ce message dans phpmyadmin alors que je n'ai fait que telecharger le pack et l'installer sans aucune modification.

La version de votre bibliothèque MySQL (5.0.51a) diffère de la version de votre serveur MySQL (5.1.33). Ceci peut occasionner un comportement imprévisible.

je ne sais comment corriger ce problème ni quoi installer ou télécharger.
merci de votre aide

Using cURL in CLI (2 replies)

flo234 — Thu, 25 Jun 2009 11:44:03 +0200

Hi,

I'm pretty new to scripting with CLI and I have a problem with cURL :)

When I use phpinfo() while in "normal mode" everything is OK:
curl
cURL support enabled
cURL Information libcurl/7.16.0 OpenSSL/0.9.8i zlib/1.2.3

And everything work (I can browse a remote file without any problem, and grab information from a xml file for exemple).

But while using cURL in my CLI script (which is a little "bot" for irc) I have this error "Fatal error: Call to undefined function curl_init()" so I think i missed something !

I searched on google and didn't find any informations that helps me, so I hope your knowledge will be helpfull :)
(for your information i'm using easyphp 3.0, and i already modified php.ini in order to have curl OK in normal mode at least)

Ps: Sorry for my English

Convert 2.0 to 3.0 (1 reply)

chris_s — Fri, 19 Jun 2009 08:08:12 +0200

I installed version 3.0 but I need to know how to get from my 2.0 Applications and database to the 3.0 version.

Can I change the database password for the root user back to a null value? I don't want to have to change the dataabase password in a whole lot of applications.

What is the correct procedure to convert MySQL databases from version 2 to version 3? It looks as if I can't just copy the data directory. Do I have to dump my database tables to SQL and re-load them?

________________________

I did some reasearch and found the mysql_upgrade utility that will check for consistency and try to fix any problems (NOT included with EasyPHP). I ran it and after that I was able to use one of the databases I copied from 2.0 but not the other one.

MySQL : could not find driver (no replies)

le_vive — Mon, 15 Jun 2009 14:33:07 +0200

Hi,
I used to develop web sites with MAMP on MacOS X.
I now work using easyphp 3.0 on XP. I've taken my web sites previously developed with MAMP and I've put them in the www folder. The web site works except that it can't connect to the database. I've got a "could not find driver" error. I've looked at the logs but nothing. I've looked at every configuration files, the connection parameters are ok. So I don't understand. Usually, this error is because of a bad configuration in the web site settings, but this time everything's ok so I don't know.
Thanks for your help.

Conect to MYSQL (11 replies)

bmeighani — Sat, 04 Jul 2009 09:42:23 +0200

Hi All,

I have EasyPHP and MYSQL is running on it. I want to connect to MYSQL and use: “Localhost”, “root” , “”
Like below:

Test MySQL1

$host="localhost";
$user="root";
$pass="";
mysql_connect($host,$user,$pass);
….
but system sends a warning message like below:

Warning: mysql_connect() [function.mysql-connect]: Access denied for user ‘root’@’localhost’ (using passwod:NO) in C:\Program Files\EasyPHP 3.0\www\SQLTest|Index.php on line 10
Do you have any idea?
Thanks

Apache after 2.0B -> 3.0 crashes without any information (no replies)

Trebly — Tue, 09 Jun 2009 00:30:02 +0200

Hello,
I installed 3.0,to use mainly wth Joomla.
I transfer and , change password to valid one.
I access to my databases with phpmyadmin without any problem (after changing [mysql] and deleted temporary index files into a new [mysqldata] directory (data are on separate disk than system).

But when I run any application (17 versions of a Joomla site), I have always a crash
"Unhandled exception in apache.exe -(PHP5TS.DLL): 0xC0000005: Access violation

as there is naturally any information into log I am completely in a deadlock situation.

nota: when i make the reverse operation (or use the back up) I get back a normal access (except with phpmyadmin because I have not taken the time to create the adapted access rights -as it was a local test installation I was not using protected env - , according to 3.0 and password datas of my init files, no matters).

Thank's for an idea I test all the solutions and way 5I found into forums) and check up with the informations of this forum.

Thank's for any help , ways to look at.
Remain with the 2.0B1 is not a solution.

Apache does not start: error 5 (no replies)

dcdomain — Mon, 08 Jun 2009 13:19:39 +0200

EasyPHP Apache2 ServerBase::Start ScanProcess -> 1848
EasyPHP CreateProcess "C:\PROGRA~2\EASYPH~1.0\MySql\bin\mysqld.exe --defaults-file="C:\PROGRA~2\EASYPH~1.0\MySql\my.ini" --language=english"
EasyPHP ServerBase::TimerProc : GetProcessVersion Apache2 (pid: 1848) error 5

I'm on Vista x64, clean install of EasyPHP 3.0, I can't get Apache to start. MySQL doesn't seem to have any issues. Any ideas? Searched for the error code, couldn't find anything.

Refresh error ? (no replies)

Madhu — Sat, 06 Jun 2009 17:25:25 +0200

I am new to Easy PHP and anything related to it.

I have created a new folder 'Header' in my local host's root folder (highlighted in the image below)

[4.bp.blogspot.com]

But I am unable to see it in local host [localhost] . I can see all other folders in the same location (plz refer to the image below), but not the folder 'Header'.

[2.bp.blogspot.com]

I used the refresh option in the browser (Firefox v 3.0.10). I restarted EasyPHP several times. I closed the browser and refreshed again. Nothing works. Can you help me get rid of this. Or is it a bug ?